How Earthquake Alerts Work: The Warning and the Report After
Two different things go by the name “earthquake alerts.” One is a warning that arrives before the shaking reaches you, measured in seconds. The other is a report of an earthquake that has already happened, and it arrives in minutes. They come from different systems and cover different parts of the country, which is where most of the confusion starts.
The warning: ShakeAlert
The only official system in the US that warns people before shaking arrives is ShakeAlert, run by the U.S. Geological Survey with state and university partners. It covers California, Oregon and Washington and nowhere else. It went public in California in 2019 and reached the whole West Coast in May 2021.
It works because an earthquake sends out waves at two speeds. The first, the P wave, travels about 3.7 miles a second and does little damage. The slower S and surface waves, about 2.5 miles a second, do the shaking people remember. ShakeAlert’s network of more than 1,500 seismic stations catches the P wave near the epicenter, estimates where the quake is and how big, and works out which areas are about to shake and how hard. If that estimate clears a threshold, a message goes out, and for anyone far enough away it arrives before the slower waves do.
“Far enough away” is the catch. The USGS describes a zone around every epicenter where people feel the shaking before any alert can reach them. Farther out, the warning grows with distance, usually to a few seconds and sometimes to a few tens of seconds. For the Pacific Northwest, the USGS expects most alerts to leave less than 10 seconds before strong shaking. Its longest estimates, 50 to 80 seconds, are for places far from a very large offshore quake.
A few seconds is enough to get under a table or step away from a window.
How it reaches your phone
ShakeAlert doesn’t message anyone directly. The USGS issues the alert and partners deliver it, in four main ways.
- Wireless Emergency Alerts. The same system that carries Amber Alerts and tornado warnings. For ShakeAlert it’s used for quakes of magnitude 5.0 and larger, and it goes only to the area expected to feel at least light shaking (intensity IV). There’s no app or signup; phones get these alerts unless someone has turned them off. The switch lives under Emergency Alerts or Government Alerts, depending on the phone.
- The MyShake app. The USGS recommends it, and it works in all three states. It alerts at a lower bar: magnitude 4.5 and up, wherever weak shaking (intensity III) is expected.
- Android phones. Google’s Android Earthquake Alerts use ShakeAlert on the West Coast. Since September 2024, Google has also run its own version in all 50 states and the territories, built from the motion sensors in Android phones. The Alaska Earthquake Center points out that it needs an Android phone with location turned on, can’t see quakes offshore, and isn’t a substitute for ShakeAlert.
- iPhones. Since iOS 26.2, Apple sends its own Earthquake Alerts, on by default, under Settings > Notifications > Enhanced Safety Alerts. Apple names California, Oregon and Washington, and the USGS now lists iOS next to Android as having alerts built in.
If you live on the West Coast, the most useful thing on this page is a thirty-second check that emergency alerts are switched on in your phone’s settings, and on an iPhone, that Earthquake Alerts is on too. (The separate “test alerts” switch doesn’t affect real ones.)
What to do with the seconds
The official advice is the same everywhere: Drop, Cover and Hold On. Get down on your hands and knees, cover your head and neck (under a sturdy table if one is close), and hold on until the shaking stops. Do it as soon as you feel shaking, even if no alert has come, since near the epicenter the shaking gets there first. If you’re indoors, stay there, and don’t head for a doorway. Ready.gov has the full version, including what to do in bed, outdoors or in a car.
Everywhere else
Outside those three states there is no official earthquake early warning. Alaska, which has more earthquakes than any other state, has a plan: a USGS design published in February 2025 calls for about 450 stations, and Congress set aside two million dollars for Alaska work in early 2026. The state seismologist still describes a working system as years away. Nevada is a step behind: the 2026 federal spending bill told the USGS to begin expanding ShakeAlert there, starting with a plan the Nevada Seismological Laboratory is helping write. I couldn’t find announced plans for any other state, the New Madrid zone included.
So outside the West Coast, apart from Google’s alerts on Android phones, earthquake alerts are the second kind.
The report: what the USGS posts afterward
Every earthquake the USGS locates ends up on its Latest Earthquakes map, with its magnitude, depth, place and time. California, with the densest network, gets its quakes posted fastest, in about two and a half minutes on average. Elsewhere in the US it takes up to about eight minutes, and outside the US about 20. The first numbers are preliminary, and the magnitude often shifts a little as more stations weigh in.
The USGS builds a few more products around that first report:
- Did You Feel It? collects reports from people who felt the quake and turns them into a map of how hard it shook, town by town. (The difference between how big a quake was and how hard it shook is its own note: Magnitude vs. Intensity.)
- ShakeMap estimates the shaking across the region from instruments and models.
- The Earthquake Notification Service emails you, or texts you if your carrier passes email through to text, about quakes in the area and size range you pick. For a big quake, the USGS warns that the last of those messages can take up to 45 minutes to go out.
None of these warn you. They tell you what happened and how hard it hit, which after a rumble is usually what you want to know.
Tsunami alerts are a separate system
Tsunami alerts don’t come from ShakeAlert or the USGS. They come from the National Weather Service’s two tsunami warning centers, in Palmer, Alaska, and Honolulu, and they have four levels:
- Warning: dangerous flooding is expected or happening. Move to high ground or inland.
- Advisory: strong currents and waves are expected. Stay out of the water and away from the beach.
- Watch: a tsunami is possible later. Stay alert for more information.
- Information statement: an earthquake happened, and there’s usually no threat.
They reach people through Wireless Emergency Alerts, NOAA Weather Radio, local TV and radio, sirens and tsunami.gov.
The USGS also puts a tsunami flag on large ocean earthquakes in its data, whether or not a wave follows. The flag only means the quake was big and offshore; whether a wave is coming is the tsunami centers’ call. The exception is a quake you feel yourself. If you’re at the coast and feel a strong or long earthquake, or see the sea suddenly rise or drain away, the National Weather Service says that is your warning: move to high ground or inland without waiting for an alert.
Where a desk display fits
Seismic Sentinel, the earthquake tracker I build, lives entirely on the report side of this page. It has no sensor and can’t warn you of anything. It shows quakes after the USGS has posted them, usually minutes after they struck, and adds context: where each one was relative to you, how hard it probably shook your town (always marked as an estimate), and how it compares with the week’s other quakes. For warnings, the phone in your pocket is the right tool.
In short
- A warning comes before the shaking, through ShakeAlert, and only in California, Oregon and Washington.
- A report comes after the shaking, from the USGS, for quakes everywhere.
- Tsunami alerts come from the National Weather Service.
- Wherever you live, keep emergency alerts on in your phone’s settings. On the West Coast they carry ShakeAlert warnings, and on the coast they carry tsunami warnings.
QUICK ANSWERS
Fair questions
Do I need an app to get earthquake alerts?
Not for the main one. In California, Oregon and Washington, ShakeAlert warnings for quakes of magnitude 5.0 and larger go out through Wireless Emergency Alerts, which compatible phones receive with no app or signup, as long as emergency alerts haven’t been switched off in the phone’s settings. Android phones and iPhones running iOS 26.2 or later also have earthquake alerts built in, and the MyShake app adds alerts for smaller quakes, magnitude 4.5 and up.
Why didn’t I get an earthquake alert when I felt shaking?
There are a few common reasons. You may be outside California, Oregon and Washington, where ShakeAlert doesn’t operate. The quake may have been below the thresholds: Wireless Emergency Alerts go out for magnitude 5.0 and larger, and only to the area expected to feel at least light shaking. Or you were close to the epicenter, where the shaking can arrive before any alert can. Wireless Emergency Alerts also sometimes arrive late or not at all.
How much warning does ShakeAlert give?
Usually a few seconds to a few tens of seconds, depending mostly on how far you are from the epicenter, and close to it there may be none. In the Pacific Northwest, the USGS estimates most people would get less than 10 seconds before strong shaking, with longer warnings only far from a very large offshore quake.
Where can I see earthquakes that just happened?
On the USGS Latest Earthquakes map at earthquake.usgs.gov. The USGS says California quakes typically appear in about two and a half minutes on average, quakes elsewhere in the US within about eight minutes, and quakes outside the US in about 20. Its free Earthquake Notification Service can also email you about quakes in the places and size range you choose.
MORE LAB NOTES
- How to See the ISS Tonight, Step by Step
- Weather Station With Tides: Why the Two Come From Different Places
- How to Choose a Desktop Flight Tracker: 5 Questions to Ask
- Magnitude vs. Intensity: The Two Numbers Every Earthquake Gets
- Weather Watch vs. Warning vs. Advisory: The Severity Ladder
- What Is a Starlink Train? The String of Lights, Explained
- The Board Inside (Almost) Every PlankLabs Gadget
- The Printers Behind the Shells: a Flashforge AD5X and a Bambu Lab X2D
- Arduino: The Workbench My Firmware Is Built On
- How to Read a Tide Chart (and Why Old Tide Clocks Drift)
- How the Outdoor Score Works: One Number for “Should I Be Outside?”
- What Is ADS-B? How Flight Tracking Works
- When Can You See the ISS? Visibility Windows, Explained
- Is It Your WiFi or Your ISP? How to Tell in 60 Seconds